 Fluorinated ethylene-propylene (FEP) Tube |
.jpg)
FEP tube is made from FEP resin and prepared by the technology of extrusion. It can be used at the temperature range of -80℃ through 200℃. There are three types of product: General purpose FEP tube, Electric-purpose FEP tube and precision EFP tube. Electric–purpose tube has excellent electrical property and can be used as dielectric protective sleeve in a various range of frequency for wire, cable and electric components. General–purpose tube has outstanding chemical resistance to virtually all chemicals and is used as conveying pipe, container lining and heat exchanger for corrosive fluid and gas medium etc. FEP tube conforms to the enterprise standard of Q/GHAD 10-2007.
Specification
Code |
O.D. |
O.D. Tolerance |
Wall Thickness Tolerance |
FEP-G-1 |
1 |
±0.05 |
0.2±0.03
0.3±0.04
0.4±0.06
0.5±0.10
1.00±0.15
1.50±0.20
2.00±0.20
2.50±0.250
3.00±0.30 |
FEP-G-2 |
2 |
±0.05 |
FEP-G-3 |
3 |
±0.10 |
FEP-G-4 |
4 |
±0.10 |
FEP-G-5 |
5 |
±0.10 |
FEP-G-6 |
6 |
±0.10 |
FEP-G-7 |
8 |
±0.20 |
FEP-G-8 |
10 |
±0.20 |
FEP-G-9 |
12 |
±0.20 |
FEP-G-10 |
16 |
±0.20 |
FEP-G-11 |
18 |
±0.40 |
FEP-G-12 |
20 |
±0.40 |
FEP-G-13 |
25 |
±0.40 |
FEP-G-14 |
32 |
±0.50 |
FEP-G-15 |
40 |
±0.50 |
FEP-G-16 |
50 |
±0.50 |
FEP-G-17 |
63 |
±0.50 |
Note: Customer’s request negotiable |
Specification
Code |
I.D. |
I.D. Tolerance |
Wall Thickness |
W.T. Tolerance |
FEP-G-S-1J |
0.80 |
±0.05 |
0.60 |
±0.05 |
FEP-G-S-2J |
1.10 |
±0.03 |
0.25 |
±0.02 |
FEP-G-S-3J |
1.28 |
±0.03 |
0.25 |
±0.02 |
FEP-G-S-4J |
1.50 |
±0.03 |
0.25 |
±0.02 |
FEP-G-S-5J |
1.98 |
±0.03 |
0.32 |
±0.02 |
FEP-G-S-6J |
2.06 |
±0.03 |
0.28 |
±0.02 |
FEP-G-S-7J |
2.36 |
±0.03 |
0.32 |
±0.03 |
FEP-G-S-8J |
2.83 |
±0.04 |
0.35 |
±0.02 |
FEP-G-S-9J |
2.93 |
±0.04 |
0.30 |
±0.02 |
FEP-G-S-10J |
3.30 |
±0.04 |
0.35 |
±0.02 |
FEP-G-S-11J |
4.46 |
±0.04 |
0.44 |
±0.02 |
FEP-G-S-12J |
4.58 |
±0.04 |
0.5 |
±0.03 |
FEP-G-S-13J |
5.99 |
±0.05 |
0.5 |
±0.03 |
FEP-G-S-14J |
7.00 |
±0.06 |
0.5 |
±0.03 |
FEP-G-S-15J |
9.00 |
±0.08 |
0.5 |
±0.04 |
FEP-G-S-16J |
13.5 |
±0.10 |
0.75 |
±0.05 |
Note: Customer’s request negotiable |
Main Properties
Item |
Value |
Relative Density |
2.14~2.17 |
Tensile Strength MPa ≥ |
Φ≤3mm |
10.0 |
Φ＞3mm |
14.0 |
Elongation @ Break % ≥ |
Φ≤3mm |
100 |
Φ＞3mm |
175 |
Dielectric Strength
KV/mm ≥ |
wall thickness≤0.2mm |
6 |
0.2mm＜wall thickness≤0.5mm |
10 |
wall thickness)≥0.5mm |
12 |
| Fluorinated Ethylene-propylene (FEP) Film |
.jpg) FEP film is made from FEP resin and prepared by extrusion blowing technology. It can be used at the temperature range of -80℃ through 200℃. There are two types of products: general-purpose FEP film and electric-purpose FEP film. Electric–purpose FEP film has excellent electrical property and is used as dielectric material for capacitor, flexible PCB and flat cable etc. General – purpose FEP film has outstanding chemical resistance to virtually all chemicals and is used as a transparent, anti-corrosive and anti-stick material in the fields of chemical, food, textile and packing industries. These films conform to the enterprise standard of Q/GHAD 11-2005.
Specification
Code |
Thickness |
Tolerance |
Flat Width |
Tolerance |
FEP-F-B-1 |
0.03 |
±0.01 |
100~700 |
±5 |
FEP-F-B-2 |
0.05 |
±0.02 |
100~700 |
±5 |
FEP-F-B-3 |
0.10 |
±0.02 |
100~700 |
±5 |
FEP-F-B-4 |
0.15 |
±0.025 |
100~700 |
±5 |
FEP-F-B-5 |
0.20 |
±0.025 |
100~700 |
±5 |
FEP-F-B-6 |
0.25 |
±0.025 |
100~700 |
±5 |
FEP-F-B-7 |
0.30 |
±0.03 |
100~700 |
±5 |
Note: Customer’s request negotiable |
Main Properties
Item |
Value |
General Purpose |
Electric Purpose |
Shrinkage Rate (Traverse & Longitudinal ) % ≤ |
3.0 |
3.0 |
Tensile Strength MPa ≥ |
14 |
14 |
Elongation @ Break % ≥ |
175 |
175 |
Tear Strength (N/m) ≥ |
4.9×104 |
4.9×104 |
Dielectric Constant (106Hz) ＜ |
|
2.15 |
Dissipation Factor (106Hz) ≤ |
|
1×10-3 |
Volume Resistivity (Ω·m) ≥ |
|
1×1014 |
Dielectric Strength
MV/m |
Thickness≤0.05mm |
＞ |
|
100 |
0.05mm＜Thickness＜0.1mm |
＞ |
|
75 |
Thickness≥0.1mm |
＞ |
|
50 |
| Fluorinated Ethylene-propylene (FEP) Rod |
.jpg) FEP rod is made from FEP resin and prepared by the technology of extrusion and molding. It can be machined into various sealing parts and electric components. It can be used at the temperature range of -80℃ through +200℃. It conforms to the enterprise standard of Q/GHAD 9-2000.
Specification
Code |
Diameter |
Tolerance |
Length |
Tolerance |
FEP—R—1 |
10.0 |
＋2.0 |
100 |
±10 |
FEP—R—2 |
20.0 |
＋2.0 |
100 |
±10 |
FEP—R—3 |
30.0 |
＋2.0 |
100 |
±10 |
FEP—R—4 |
40.0 |
＋2.0 |
100 |
±10 |
FEP—R—5 |
50.0 |
＋2.0 |
100 |
±10 |
FEP—R—6 |
60.0 |
＋2.0 |
100 |
±10 |
FEP—R—7 |
70.0 |
＋2.0 |
100 |
±10 |
FEP—R—8 |
80.0 |
＋2.0 |
100 |
±10 |
FEP—R—9 |
90.0 |
＋2.0 |
100 |
±10 |
FEP—R—10 |
100.0 |
＋2.0 |
100 |
±10 |
Note: Customer’s request negotiable |
Main Properties
Item |
Value |
Tensile Strength MPa |
≥20 |
Elongation @ Break % |
≥250 |
Relative Density |
2.14~2.17 |
| Fluorinated Ethylene-propylene (FEP) Sheet |
.jpg) FEP sheet is made from FEP resin and prepared by the technology of molding. It can be used as sealing part, wear-resistant component and electric component under the condition of high frequency and corrosive media at the temperature of -80℃ through +200℃. It conforms to the enterprise standard of Q/GHAD 8-2000.
Specification
Code |
Length×Width |
Length & Width Tolerance |
Thickness |
Thickness Tolerance |
FEP—S—1 |
160×160 300×300 |
±2.0 |
1 |
±0.20 |
FEP—S—2 |
160×160 300×300 |
±2.0 |
2 |
±0.20 |
FEP—S—3 |
160×160 300×300 |
±2.0 |
3 |
±0.30 |
FEP—S—4 |
160×160 300×300 |
±2.0 |
4 |
±0.30 |
FEP—S—5 |
230×230 |
±2.0 |
5 |
±0.30 |
FEP—S—6 |
230×230 |
±2.0 |
10 |
±0.50 |
Main Properties
Item |
Value |
Tensile Strength MPa |
≥20 |
Elongation @ Break) % |
≥250 |
Relative Density |
2.14~2.17 |
| Heat Fluorinated Ethylene-propylene (FEP) Shrinkable Sleeve |
.jpg) FEP heat-shrinkable sleeve is made from FEP resin and is prepared by the technology of extrusion and blowing. FEP heat-shrinkable sleeve has a high UV transmission, UV resistance and good electric property. The shrinkage temperature is from 130℃～200℃. The shrinkage rate is about 30%. Another major advantage of FEP heat-shrinkable sleeve is being heat-sealed or welded to itself. So, FEP heat-shrinkable sleeve can be used as cable jackets, non-stick rollers, sensor probe covers, hose protection, electrical terminal insulation etc. It conforms to the enterprise standard of Q/GHAD 59-2006.
Main Properties
Item |
Value |
Tensile Strength MPa ≥ |
20 |
Elongation @ Break % ≥ |
150 |
Dielectric Strength
(KV/mm) ≥ |
Wall Thickness after shrinkage≤0.3mm |
10 |
0.3mm＜Wall Thickness after shrinkage≤0.4mm |
11 |
Wall Thickness after shrinkage＞0.4mm |
12 |
Specification
Code |
I.D. |
Wall Thickness after shrinkage |
Continues Length |
Min.
(Before Shrinkage) |
Max.
(After Shrinkage) |
Wall Thickness & Tolerance |
FEP-G-S-1 |
6.5 |
5 |
0.20±0.08
0.25±0.08
0.30±0.08
0.40±0.08
0.5±0.10
0.6±0.15
0.7±0.15 |
≥500 |
FEP-G-S-2 |
8 |
6 |
≥500 |
FEP-G-S-3 |
9 |
7 |
≥500 |
FEP-G-S-4 |
10 |
8 |
≥500 |
FEP-G-S-5 |
12 |
9 |
≥500 |
FEP-G-S-6 |
14 |
10.5 |
≥500 |
FEP-G-S-7 |
15 |
11 |
≥500 |
FEP-G-S-8 |
16 |
12 |
≥500 |
FEP-G-S-9 |
18 |
13.5 |
≥500 |
FEP-G-S-10 |
22 |
16 |
≥500 |
FEP-G-S-11 |
24 |
18 |
≥500 |
FEP-G-S-12 |
26 |
20 |
≥500 |
FEP-G-S-13 |
29 |
22 |
≥500 |
FEP-G-S-14 |
32 |
25 |
≥500 |
FEP-G-S-15 |
38 |
30 |
≥500 |
FEP-G-S-16 |
41 |
32 |
≥500 |
FEP-G-S-17 |
45 |
35 |
≥500 |
FEP-G-S-18 |
50 |
38 |
≥500 |
FEP-G-S-19 |
52 |
40 |
≥500 |
FEP-G-S-20 |
60 |
45 |
≥500 |
FEP-G-S-21 |
72 |
55 |
≥500 |
FEP-G-S-22 |
90 |
70 |
≥500 |
FEP-G-S-23 |
115 |
90 |
≥500 |
FEP-G-S-24 |
130 |
110 |
≥500 |
FEP-G-S-25 |
140 |
120 |
≥500 |
Note: Customer’s request negotiable |
|
